|
|
 Regular
Posts: 73
  Location: Madison, AL | I have 2 questions.
1. Attached is a photo of a pants pattern ready to print. Why is the back hem like that?
2. I have the pants crotch setting in Defaults as Jeans Cut and the Radio Button for the saved pants is also set for Jeans Cut, yet the style summary says Slack Cut.
(20190511_211722.jpg)
Attachments ----------------
20190511_211722.jpg (68KB - 0 downloads)
|
|
|
|
 Tech Support
       Location: Colorado Springs, CO | The seam allowance is going to the inside. Usually a setting is doing this. Try changing the seam allowance and see if it moves to the outside.
You can send me your database and I can check this. Support@wildginger.com
Be sure to tell me what chart you are using and name of saved style. |
|
|
|
 Regular
Posts: 73
  Location: Madison, AL | Okay, I just sent you my database to look at the Jeans Cut crotch issue. I did manage to fix the seam allowance/hem issue. I didn't monkey with any SA settings though. I realized I had gone the wrong direction with the waist drop (luckily I had my previous style summary printout), so I fixed that, and also discovered that the crotch shaping settings we had settled on were not there, so I put them back in and magically the SA/Hem issue seems to have been fixed. |
|
|